Specification:
Product name: DC12V, 24VIB road remote control switchWorking voltage: DC12V/24V(optional)Working frequency: 315MHZ/433MHZ (optional)Working mode: Jog M4/self-locking T4/interlocking L4/jogging and self-locking coexistCode pairing method: intelligent learning typeWorking environment: -40~+80 degreesReceiving sensitivity: 105dBmOutput current: inductive3.5A, resistive6ADimensions: 120 x 73 x 19mm (without shell), 125 x 78 x 3mm (with shell)
Product name: 1000m 18-key remote controllerWorking voltage: DC12V (12V 23A)Working frequency: 315MHZ/433MHZ ((optional))Chip model: 1527 or 2264Encoding type: millions of codes or pad type into a passwordOscillation resistance: 4.7 (default)Modulation method: ASK (stable and less interference)Remote control distance: 1000 meters (open)Dimensions: 131.7 x 53 x 15.3mm
Note:The receiver is powered by 12V or 24V, and the default is 18 independent relay signal output (that is, without voltage output). The output terminals have normally open, normally closed, and common terminals (all without voltage). This switch can generally be applied to the following two occasions.1. With 12V or 24V voltage output, this kind of equipment only needs to draw a positive wire from the input end to the common end and then share the negative wire of the input to directly control the 12V or 24 device.2. Directly connect the normally open end and common end of the output end to other voltage circuits to control its on and off! (The recommended control voltage range is: 3V-250V, current range: 0.1A-10A resistive load)
Instructions for use:
Working method and status:The receiver has the following 5 working modes can be set, 18 channels all jog, 18 channels all self-locking, 18 channels all interlock, separate several channels of jog self-locking and interlock coexist. 1. Jog: press the remote control button 2 to learn 2. Self-locking: press the remote control key 1 to learn 3. Interlock: press the remote control key 3 to learn 4. 1-9 road self-locking. 10-18 road jog: press the remote control key 4 to learn5. 1 way is self-locking. 2-18 way jog: press the 5th key of the remote control to learn Add or delete the instructions for using the remote control:1. Learning: Press the learning button on the receiver and let it enter the learning state; according to the function you need, you can choose to press a button on the remote control to learn. After the receiver receives the signal, the indicator light flashes about once. Learning is successful.2. The 2262, 2260, 1527 chip equivalent frequency fixed code learning code wireless remote control that can learn more than 20 different address codes;3. Clear code: long press the learning button on the receiver for about 8 seconds until the indicator light goes out, indicating that the clearing is successful.
Package included:
1 x wireless remote control switch1/2 x Remote controller (no battery includes)