ORACOLOR Matt Finishing Agent (50ml) 100-995 from Oracover

In order to get a matt-finished surface, simply add our MATT-FINISHING AGENT to the ORACOLOR paint system. The level of matting can be adjusted by the dose added.

PLEASE NOTE: The matt finishing agent slightly changes the colour of the paint.

The addition of a matt-finishing agent requires a hardener in a 2:1 ratio.
Depending on the spraying device, thinner up to 40% can be added.

Essential Accessories:

ORACOLOR hardener for spraying

OR

ORACOLOR hardener for brushing

AND

ORACOLOR special-thinner

Contents: 100 ml

2-component

Mixing ratio in ml: 2:1 (Matt-Finishing Agent:Hardner)

Information on product safety:

Hazard statements:
H225 Highly flammable liquid and vapour
H319 Causes serious eye irritation
H335 May cause respiratory irritation
H336 May cause drowsiness or dizziness

Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P271 Use only outdoors or in a well-ventilated area.
P403+P235 Store in a well ventilated place. Keep cool.
P501 Disposal in accordance with official regulations.

Special labelling of certain mixtures:
EUH066 Repeated exposure may cause skin dryness or cracking

Manufacturer: LANITZ-PRENA Folien Factory GmbH, Am Ritterschlsschen 20, 04179 Leipzig, Germany, [email protected]