Digipoxy MMA Fast Cure 5 minutes 2K Epoxy Black from Digitech

Digipoxy Fast cure 2K epoxy MM 5-10 minutes Extreme fast 5-10 minutes working cure full strength after just 30 minutes. Metals , Carbon , Plastic..

FEATURES:
High viscosity, non-sag application
Fast cure system
Excellent tensile and impact strength
Primerless metal bonding for most metals
Excellent environmental and chemical resistance
Minimal surface preparation
Choice of working times
MMA based 1:1 mix ratio
Fixture time is the time to achieve 70% of ultimate strength in lap shear

TYPICAL PHYSICAL PROPERTIES at 24C (75F):
Tensile Strength MPa (psi) 35 40 (5,076 5,802)
Lap Shear Strength MPa (psi) 18 25 (2,611 3,626)
Maximum Tensile Elongation (%) 5 10
Service Temperatures C (F) -40 to 100 (-40 to 212 )
Tensile Modulus MPa (psi) 1,100 1,240 (160,000 180,000)

RECOMMENDED SUBSTRATES:
Composites: epoxy laminates, FRP (polyester/vinyl ester), gelcoats
Metals: aluminium, carbon steel, stainless steel
Thermoplastics: ABS, acrylics, vinyl, PVC, polycarbonates

Package Contains 1 Cartridge / 1 Nozzle