UniLight Kill Switch 1 KILLSW-1-DIY

The uniLIGHT kill-switch is a simple system to separate the battery or power supply reliable from the electronics and thus prevent unwanted residual currents and discharge. It can be used very well with lights, BEC and ignition systems, but is also ideal for completely separating the system batteries before a battery backer. It also offers other additional functions:

• Multiple options for soldering cables, MPX or XT sockets
• Current capacity 20A continuous, 40A peak possible
• Control LED for switch-on control, can be deactivated
• Support-capacitors for better voltage stability, can be deactivated
• Can be used as a simple diode battery backer for dual power supply, 0.3V loss, can be activated
• High-current charging of the battery
• Multiple systems combination on common carrier plates

Operating voltage input: up to 50VDC
Output electricity constant: up to 10A
Hightest electricity: 15A
Output voltages: 8.4V / 8.0V / 7.4V / 6.4V
Weight (without cable): appx. 26g
Dimensions: 34x54x10mm
Scope of delivery: JST BEC Kabel M/F, mounting clips