Description:
This product is a non-contact AC voltage detection pen with dual sensitivity switching, with sound and light alarm, flashlight lighting and other functions. It is a good tool for electricians to check and repair.
Features:
1. Small, light and portable, convenient and easy to use, and zero-fire line identification is more convenient and quick.2. Partition wall detection, non-contact testing is safer and safer electrical testing3. Brand new circuit board design, more sensitive, more stable and smarter4. The LED flashlight lighting function can easily measure even in dim environments.5. It will automatically shut down when there is no operation for 5 minutes and no AC voltage is detected. Low energy consumption ensures longer battery life.
Specification:
Product name: non-contact AC voltage testerMaterial: ABSShape Of Probe: FlatAC voltage measurement range: 12~1000V
Frequency: 50/60HZNCV sensitivity: high, medium, lowAlarm mode: sound and lightFlashlight: white LED lightingAutomatic shutdown: yesLow battery indicator: YesWorking power supply: 2 x 1.5V AAA dry battery (not included)Working temperature: 0~40Storage temperature: -10-50Dimensions: 156 x 20 x 20mmWeight:Approx. 50g
Instructions for use:
AC voltage detectionInsert the probe of the tester into a power outlet or close to a live wire. When the tester has a faulty AC voltage signal, the induced voltage signal indicator will flash. According to the detected signal indicator, the signal strength indicator will flash. Three colors of green, green+red or red are displayed, and the buzzer emits alarm sounds of different frequencies at the same time:When an AC voltage signal is detected, the signal strength indicator is green (low);When a higher AC voltage signal is detected, the signal strength indicator is red (high).
Turn on/offPress and hold the power on/off button for two seconds, the buzzer will sound an alarm, the flashlight, intensity indicator, signal strength indicator band, power/battery indicator will flash once or wait for a time when the toggle switch button is low . When no AC signal is detected, the power indicator will change to the breathing indicator state in the current standby state. When the tester is turned on, press the power on/off button to turn off thetester.
Low/high sensitivity switchThe first is low sensitivity. The AC voltage range is about 48-1000V. When the ‘S’ button is pressed, the button indicator lights to indicate the current high sensitivity state, and the AC voltage range is about 12-1000V. Press the button to switch between low/high sensitivity.
Turn on/off flashlightWhen thetesteris turned on, press the flashlight on/off button to turn on/off the flashlight.
Automatic power off functionWhen thetesterdoes not operate or thetesterhas no signal detection range, thetesterwill automatically power off.
Neutral/Fire Line JudgmentSeparate the two wires to be tested as far as possible, and then use the probe of thetesterto approach the wires. For sockets, insert the probe into the socket. Thetesterdetects that the signal with strong induction is the live wire, and the one with weak or no induction signal is the neutral wire..
Battery undervoltage indicationWhen the battery voltage is low, the power/low battery indicator is steady red. Please replace the battery in time.
Package included:
1 x Non-contact AC voltagetester(battery not included)1 x English user manual