Pichler Sinbad Glider (Laser Cut Balsa Kit) / 2500mm 15032

The Sinbad is a glider model for relaxed flying. The low take-off weight and theassociated, low wing loading make the Sinbad the ideal light-wind glider. the quiet,majestic flight image inspires both inexperienced pilots and professionals. The Sinbad can optionally withbe equipped with a brushless electric drive. The installation of a motor is prepared at the factory.The Sinbad is controlled via rudder, elevator and ailerons

Click here to view the pdf manual

Specifications

Span – 2500mm

Length – 1525mm

Take-off weight – 2300g (incl. drive and battery)

Area – 137.66 dm

Wing loading – 13.8 g/dm

Recommended Equipment

MASTER Servo DS3010, #C9267 (x2)

MASTER Servo DS3012MG, # C5638 (x2)

Brushless motor BOOST 40LS, # 15034

Brushless ESC/Controller = PICHLER XQ-50, # C3055

Folding prop = 127, # C4202

LiPo battery = LEMONRC 3300-11.1V, # C4973

Servo cable extension 600 mm, # C9616 (x2)

Servo cable extension 250 mm, # C9614 (x2)

Battery Velcro straps 210 mm, # C4738

Recommended Tools

Mini balsa plane, #C8891

Sanding Block, #X5568

Sandpaper file, #X5565

Bindan propeller glue, # X3577

Adhesive for canopy L530, # X3583

fix it! Adhesive Assortment, # C4924

fix it! Metal clips 50mm, # C4919

fix it! Mini Clamps, #C4923

Model Making Pins, #C2434

Foil Iron, #C9758

Oracover covering film transparent of your choice

Adhesive recommendation. We generally recommend using BINDAN propeller glue. With this you achieve permanent, secure bonds. For gap-free connections, Fix It! used superglue will. For particularly stressed areas we recommend Fix It! 5 mins epoxy.