Secraft Futaba V2 1.75″ (M3) Servo Arm (Red) SEC113

Material: aluminium 6061-T6 (anodized)
Compatible with Futaba servos (25T)
Length: 1.75inch (44.5mm)
Fixing screw bolt is M3 or #4-40
Weight: 6g
1 Per package
Bolt is not included

Installation Guide:

• Follow aircraft manufactures recommendation for Servo control horn set up.
• Loctite all servo screws.
• Install ball link on bottom of servo arm (where possible).
• Keep all linkage tight.
• Servo arms longer than what is recommended can cause.