Product description:1. 5V solid state relay 240V 2A, the output with a resistive fuse 240V 2A.2. Size:1 way: 25 x 34 x 25 (long x wide x high)2 way: 55 x 33 x 25 (long x wide x high)4 way: 57 x 55 x 25 (long x wide x high)8 Way: 106 x 56 x…
Product description:
1. 5V solid state relay 240V 2A, the output with a resistive fuse 240V 2A.2. Size:1 way: 25 x 34 x 25 (long x wide x high)2 way: 55 x 33 x 25 (long x wide x high)4 way: 57 x 55 x 25 (long x wide x high)8 Way: 106 x 56 x 25 (L x W x H)3. Input power: 5V DC (160MA)4. The input control signal voltage:High level module: (0-2.5V state low level relay ON)(3.3-5V state high level relay OFF)Low level module: (0-2.5V state low level relay OFF)(3.3-5V state high level relay ON)5. There are 2.54CM pin and blue KF301 terminal control line is more convenient.
Input section:DC +: Connect the power supply positive (according to the relay voltage)DC-: Connect the power supply negativeCH1: 1 relay module signal trigger terminal (low level trigger active)CH2: 2 relay module signal trigger terminal (low level trigger active)CH3: 2 relay module signal trigger terminal (low level trigger active)CH4: 2 relay module signal trigger terminal (low level trigger active)
Low-level trigger refers to the voltage between the signal trigger terminal and the negative terminal of the power supply is OV, or the voltage of the trigger terminal is lower than the voltage of the positive terminal of the power supply. When the voltage is low enough to trigger, the relay is pulled in, The negative side of the power supply is connected to the trigger side of a trigger, so that the relay is pull.
Electrical parameters:
Voltage Version
Quiescent Current
OperatingCurrent
Trigger Voltage
Trigger Current
1 channel 5V
0mA
12.5mA
0-2.5V
2mA
2channel 5V
0mA
22.5mA
0-2.5V
2mA
3 channel 5V
0mA
48mA
0-2.5V
2mA
4channel 5V
0mA
102mA
0-2.5V
2mA
Package included:
1 x Relay module
Note:1. Module power supply: power must be DC, 5V power supply2. Wiring method: When the trigger side of the signal trigger level, the relay will be connected, the device has electricity and work3. Module control terminal voltage: This module can only be used to control the AC current, can not control the DC current.
Reviews
There are no reviews yet.