Features:

CCM5D DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions.
The display range of 3-digit LED display is 000-100. ( For example, displayed 60, it means that the PWM output duty cycle is 60% )
Input supply voltage range: DC 6V-30V
Rated current: 6A, Max 8A
PWM frequency: 16kHz
Adjustable speed range: 0%-100%.
Incorporate a push key. Push closed, and then push open.
Item size: 79 x 42 x 24mm
Potentiometer: resistance B100K; cable length 20cm; open hole distance 8mm

Operating instruction:

WARNING:
Before you attempting to wire the controller, make sure power is off.
DO NOT REVERSE POSTIVE AND NEGATIVE POWER LOADS.THIS WILLDAMAGE THE CONTROLLER.
TO CHANGE MOTOR DIRECTION, INTERCHANGE THE POSITIVE AND NEGATIVE WIRES OF MOTOR.

1. Connect wires refer to the wiring diagram.
2. Turn on the power, and adjust the potentiometer.
3. The LED display displays the PWM output duty cycle.
4. Push the key, the controller closed, push it again, the controller open.

Package included:

1 x DC motor speed controller

,,,,