Features:– Module with regulator IC supports 3.2V/5V power supply– With SD card holder, you can do experiments like digital photo frame– The module reserves the Nokia3310/5110 interface, supports the 1602 interface, and plugs in & out!– IO for streamlined wiring– LCD resolution: 128X160, driver IC: ILI9163/ST7735Wiring:IO for streamlined wiring: (only 3 IOs after optimization)1.RST– directly connected to the microcontroller reset signal terminal, this IO can save2.D/C–connected to low level, the chip selects long-term effective, this IO can save3.D/C–connected to IO control register selection4.DIN–connected to IO control data transmission5.CLK–connected to IO control SPI bus6.BL–Connected to the high level 3.3V backlight is always bright, then this IO can saveIO for standard wiring: (6 IO)1.RST–connected to IO control LCD reset2.CE–connected to IO control chip selection3.D/C–connected to IO control register selection4.DIN–connected to IO control data transmission5.CLK–connected to IO control SPI bus6.BL–connect IO control backlight on or off or PWM control brightnessPackage Included:
1 x 1.8 Inch LCD Module