Specification:

Product name Dial the code switch Spacing 2.54MM Operating force 8N(limited) Push the button trip 2.00mm Use of temperature -20~+70 Storage of temperature -40~+85 Contact impedance Initial value is 50m, and the maximum value after the test is 100m Insulation impedance Maximum value is 100 megohm and 500VDC Compressive srength 500VAC/1 minute Event a capacitance Five pf limit Loop Single contact selection Electrical life When tested under voltage 24VDC and current 25mA, it can be toggle back and forth for about 2000 times Rated current for infrequent switching of switches 10mA, 50VDC The switch frequently switches the rated current 25mA, 24VDC

Product introduction:

DIP switch (also known as DIP switch, toggle switch, overfrequency switch, address switch, toggle switch, digital switch, dial switch) is an address switch for operation control, using 0/1 binary coding principle

Shell color: red: (Gold plated pin with high reliability and high temperature resistance)

Contact resistance: <50 mM 2.54mm pin spacing chip dip switch

Widely used in data processing, communication, remote control and anti-theft automatic alarm system, air shower, train model and other manual programming products

Cover: PBT plastic(red)

Base: PBT plastic(black)Operating lever: PBT plastic(white)Pottin adhesive: epoxy resinTerminal: tin plated phosphor bronze, contact gold platedSealing tape: polyimide KAPTONMatters needing attention:1. Ensure that the switch is in the ‘OFF’ position during all operations;2.Hand welding: use 30W soldering iron control, the temperature is 320welding time is about 2 seconds;3. Wave welding: solder temperature is recommended at 250+5;4. Cleaning process: the use of ultrasonic cleaning. can give better effect the use of steam cleaning the temperature can not exceed 51.

Package Included:

45 x2.54mm Toggle Switch