Description:

No Power Spindle Assembly Small Lathe Accessories Trimming Belt JTO/B10/B12/B16 Drill Chuck Set

Specification:

B10 Drill Chuck

JTO Drill Chuck

B16 Drill Chuck

B12 Drill Chuck

JTO Drill Chuck Connecting Rod

B10 Drill Chuck Connecting Rod

XL10T 5mm Hole Synchronization Wheel

Features:

-The shipper and the synchronous wheel are equipped with the gasket isolation of 1mm to lock tightly.
– The rotation is smooth and without phase grinding, and the accuracy is good.
-No power spindle, precision machining by grinding machine, precision of 0.005mm, that is, a high-precision spindle with less than one wire.
– DIY bench drill, bench mill, table saw and so on.
– Through the connecting rod, the shaft sleeve link is eliminated, and the drill clamp is installed directly, so the accuracy is higher.
– The non-powered spindle (Mohs drill chuck connecting rod) is precision machined with a grinding machine with an accuracy of 0.005MM. Can be used to make bench drills, bench mills, table saws, etc.

Installation tips:

1. Pay attention to the mounting direction of the bearing, and carefully look at the description diagram or video.
2. Do not damage the bearing blindly. Patience and carefulness are the key points of mechanical work.
3. Various methods: to activate the brain and complete the assembly.
4. The sliding block and the contact surface of the synchronous wheel shall be separated by gasket to prevent phase grinding.The gasket is small. Don’t lose it.

Package Included:

More Details: