ORACOLOR for ORACOVER 2-K-Elastic Varnish Fluorescent Red Paint (160ml) from Oracover 121-021

For this 2-component paint you will need additionally to every tin of paint one original ORACOLOR Hardener. For this kind of paints only the ORACOLOR Hardener for spraying can be used. Completely cured, ORACOLOR is FUEL PROOF and CAN BE IRONED ON. As the chemical properties of fluorescent pigments create a matt finish, varnishing with ORACOLOR UV protection paint is inevitable in order to achieve a shiny surface and ultraviolet resistance. You can apply ORACOLOR UV protection paint clear paint after ca. 3-5h drying time. Furthermore, we would like to inform you that our model aircraft paints are highly concentrated and that, depending on the spraying machine, they need to be diluted up to 40% with ORACOLOR Special thinner to have the optimal consistency especially at lower or higher temperatures.

Important note:
Fluoro paints are only suitable for spraying
In order to get the best colouring result do a base layer with ORACOLOR white before applying fluoro paint.

Features:
High gloss, scratch resistant and non-yellowing
Permanently elastic without plasticisers
Sprayable due to appropriate hardener (spray hardener)
Highly elastic and iron-resistant
Adheres to many solvent-resistant plastics, such as polyester, GFK, CFK, wood and metal
Easy to apply with spray equipment
Highly concentrated, can be diluted by up to 40 % for airbrush application
Fuel-resistant

Processing: Mixing ratio: 3,2:1 (paint:hardener)

Note before use:Not suitable for surfaces not resistant to organic solvents.

Downloads for this article: processing instructions

Please note the necessary accessories!