Pichler Brushless motor BOOST 40 “Hanno Special” C8742

High-quality brushless motor BLDC (outrunner) for model aircraft. The BOOST motor series is the result of our more than 15 years of experience in the field of modern electric drives.

Features

• Highest manufacturing quality
• Perfect ventilation through open case design
• Use of the best materials
• High temperature resistant neodymium magnets
• Extra large quality ball bearings

Area of application – model/take-off weight

– 3D aerobatic models up to approx. 1800g

– Aerobatic models up to approx. 2400g

– Trainers up to approx. 2700g

– Gliders up to approx. 3000g

Included

– BOOST 40 brushless motor ( Please Note the picture shows the Boost 45 which is not correct)

– Aluminum mounting cross

– Propeller adapter for bulkhead/rear bulkhead assembly

– Fixing screws

– Instructions German/English

Technical specifications

Dimensions = = 35mm / L = 54mm

Weight = 205g

Motor shaft = 5.0mm

Number of poles = 14

LiPo battery / number of cells = 3 -5 cells

Idle Speed per Volt (KV) = 890 rpm

Max load = 45A (30s)

Special accessories (recommended)

Brushless ESC XQ-50, # C3055

LiPo battery LEMONRC 3300-11.1V, # C9473

LiPo battery LEMONRC 3300-14.8V, # C9474

Prop recommendation

7.4V (2S) = 13×8, 14×7

11.1V (3S) = 12×6, 13×7, 13×6

14.8V (4S) = 11×6, 11×7, 12×6

Note: Of course, other propellers (e.g. 3-blade or smaller sizes) than those specified here can also be used. Batteries with a different, e.g. higher, capacity can also be used. Please ensure that the permissible currents (A) are not exceeded. We recommend our proven POWER WATTS 150, # C7282, for easy current measurement. A device that you need again and again and should not be missing in any equipment.