PowerBox Evo 4250

ThePowerBox Evois an ultra-compact dual power supply featuring 7 channels, regulated output voltage and telemetry. The 7 inputs are assigned to 12 outputs, allowing two servos to be controlled in parallel on each of 3 channels, without requiring additional Y-leads. All servo outputs have integral signal amplification and are protected against servo feedback currents.

ThePowerBox MicroSwitchincluded in the set is not subject to wear, and operates both electronic switches reliably. It is also used to set the output voltage and the battery type.

By default the two high-performance voltage regulators deliver 6.0V, but that value can easily be changed to 7.4V, 7.8V or no regulation at all using thePowerBox MicroSwitch. The machined aluminium heat-sink ensures a high continuous load capacity.

ThePowerBox Evosupports all current telemetry systems: PowerBox, Jeti, Futaba, Multiplex, Graupner, Spektrum and JR, which means that the voltage of both batteries can be monitored conveniently from the transmitter. It is also possible to read off the state of charge of the batteries at any time using the two tri-colour LEDs.

Features

• 7 channels
• 12 outputs
• High-performance battery backer with high continuous load capacity
• All power electronics duplicated
• Redundant electronic switch
• Four selectable output voltages: 6.0V, 7.4V, 7.8V or unregulated
• Telemetry data for PowerBox PBUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum, SRXL2, Multiplex M-Link, JR X-BUS and Graupner HoTT
• All features can be controlled from PowerBox and Jeti transmitters
• Signal amplification for all 12 outputs
• Voltage indication by means of tri-colour LEDs
• Supports four battery types: LiPo, LiIon, NiMh/NiCd, LiFe
• Servo feedback current suppression
• Machined high-performance heat-sink for optimised heat dissipation
• Machined, anodised aluminium switch case
• Compact format
• Manual

Technical Data

Operating voltage 4.0V – 9.0V Power supply 2S LiPo, 2S Lilon, 2S LiFePo, 5S NiMH Current drain Power-on state 66mA Current drain Standby 8A Maximum load current 2×10 A (<30s 2x 40A) Drop-out voltage 0.3V Output voltage 6.0V, 7.4V, 7.8V, unregulated Signal input PWM Supported RC systems PowerBox, Jeti, Futaba, Multiplex, JR, Graupner, S Channels 7 Servo sockets 12 Supported telemetry systems PBUS, S.BUS2, EX-BUS, SRXL2, M-Link, Hott, JR-DMS Dimensions 89 x 55 x 18 mm Weight 69g Weight Sensor Switch 8g Temperature range -30C to +105C

Set Includes

PowerBox Evo

MicroSwitch

8x patch leads

6x fixing screws

4x rubber grommets and brass sleeves

Operating instructions Click here