Secraft Hitec V2 1.5″ (M3) Servo Arm (Blue) SEC004

Material: aluminium 6061-T6 (anodized)
Compatible with Hitec Servos (24T)
Length: 1.5inch (38mm)
Fixing screw bolt is M3 or #4-40
Weight: 5g
1 Per package
Bolt is not included

Installation Guide:

• Follow aircraft manufactures recommendation for Servo control horn set up.
• Loctite all servo screws.
• Install ball link on bottom of servo arm (where possible).
• Keep all linkage tight.
• Servo arms longer than what is recommended can cause.