UniLight 8Wx2 Position-/Navigation Light 24mm T-Fuse White PRO24F-080×2-WE

Profiled high-performance spotlight with doubled efficiency 8Wx2 and very good beam angle through a special spreading cap. The luminaire is delivered as a ready assembled unit on an aluminium cooling plate and a changeable polycarbonate cap as covering. The luminaire is ready to use for 2S Lipo (ca. 8V) operation. With 3S (12V) operation, the enclosed resistor has to be used. Alternatively use a 8W-3S adapter cable.

Please note that high-performance LEDs can get very hot, up to 70C is quite normal. These lamps with heatsink housings are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Please check operation temperatures after installation. In case of overheating, the integrated overtemperature switch will switch off or downsampling the luminaire.

Electricity: 8W reference power, 8(12)V, 0.7A
Beam angle: >160
Light intensity: ~180 Lumen RED
Light intensity: ~280 Lumen GREEN
Light intensity: ~400 Lumen WHITE
Dimension base plate: 24x56x9mm
Thickness assembly plate: 2mm
Weight: 9g (without cable)

Ready to use with 1m connection cable and ready made series resistor for 2S and enclosed resistor for 3S